|
MODEL 60 SERIES STANDARD CARBURETOR The ALGAS Model FT-60 mixer is a single diaphragm air gas valve carburetor/mixer. It offers a 90-degree air inlet to provide low overhead clearance. This mixer is available for propane application. The mixer is equipped with ports for both balance line and venturi vacuum.......View More
|  |
MODEL 100 SERIES | The Model 100 Series is a single diaphragm air-gas valve carburetor/mixer. It offers a 90-degree air inlet to provide low overhead clearance, and is available with several air horn and throttle body options. This unit is available for propane, natural gas and digester gas applications. It has been successfully used for other hydrocarbon-based vapor fuels as low as 500 BTU. The Model 100 is also available for Feedback applications with the ‘FB’ designation......ViewMore |  |
MODEL 125 SERIES The Model 125 carburetor is a single-diaphragm air valve carburetor / mixer. It offers a downdraft air inlet that can be used for remote air filtration or open-element type air filters. This unit is available for propane, natural gas, and digester gas applications. It has been successfully used for other hydrocarbon based vapor fuels as low as 500 BTU.... View More |  |
MODEL 200 SERIES The Model 200 Series is a single diaphragm air-valve carburetor / mixer. It offers a 90° air inlet to provide low overhead clearance, and is available with several air horn and throttle valve options. This unit is available for propane, natural gas, and digester gas applications. It has been successfully used for other hydrocarbon-based vapor fuels as low as 500BTU...... View More
|  |
MODEL 600 SERIES | The 600 Series Mixer is a concentric flow type air valve carburetor. A precision gas metering valve is attached to the air valve. The air valve and gas valve motion is linear in relation to the volumetric flow. The air fuel ratio is controlled by the adjustable power valve, the shape of the gas metering valve and the pressure from the gas regulator......View More |  |
TITAN REGULATOR The TITAN is a two stage high pressure regulator designed for high pressure CNG systems.Rating - up to 25,980 kPa (3771 psig) inlet
Outlet pressure at second stage - 131 psig to 43.5 psig (0.9 Mpa to 0.3 Mpa)
Capacity – upto 400 Hp
This HPR is currently being used by Cummins for their BGI engines |  |
HPR SERIES HIGH PRESSURE REGULATOR | The HPR-3600 is a single stage high pressure regulator designed for high pressure CNG (compressed natural gas) systems. This regulator is engine coolant heated to prevent freezing and has dual outlet ports for universal installation flexibility. The HPR is rated up to 24,800 kPa (3,600 psi) inlet and provides a regulated outlet pressure of 1,030 ± 140 kPa (150 ± 20 psi) which makes it compatible with the IMPCO “P” (positive) type regulators. It is also supplied with an external pressure relief valve which is calibrated to open if outlet pressure exceeds 2,760 kPa (400 psi). Regulatory approvals include UL and AGA/CGA. TUV certification is available with the 989C model only.....View More |  |
MODEL KN REGULATOR The Garretson model KN is a secondary regulator designed for sensitivity and simple operation.It is used with low pressure vaporized gaseous fuels...View More |  |
COBRA SERIES TWO-STAGE CONVERTER | The IMPCO COBRA® Series converters deliver superior performance and excellent pressure output consistency throughout service life. Three vapor outlet pressures are available. Use of the standard blue secondary spring provides negative 0.37 kPa (-1.5 inches w.c.). The optional orange secondary spring provides negative 0.12 kPa (-0.5 inch w.c.) and the red secondary spring negative 0.05 kPa (-0.2 inch w.c.) output......View More |  |
MODEL PJ SERIE-TWO STAGE CONVERTER, CNG The Model PJ Series is a positive pressure, two-stage regulator. It is designed for positive pressure CNG fuel systems where liquid vaporization and engine coolant heating is not required. These regulators are able to provide positive flow in applications up to 59.7 kW (80 hp). PJ regulators are available in several fixed pressures. Adjustable pressure units are also available in varying pressure ranges........View More |  |
MODEL EV & PEV SERIES-TWO-STAGE CONVETERS The IMPCO Model EV & PEV Series are two-stage regulators / converters. They are intended for vapor withdrawal systems. Heating with engine coolant is not required. Diagnostic test ports are standard for both the primary and secondary pressure chambers, and a choice of diaphragm materials is available. EV &PEV Series regulators / converters are renewable with the appropriate repair kits.........View More. |  |
MODEL VFF30-VACUUM FUEL LOCKS & FILTERS
The Impco VFF30 is a combination fuel lock off and filter,
engineered for use with LPG or Natural Gas. A pressure of 1.69 kPa (0.5”Hg) is required. To open the lockoff. The VFF30 is suitable for engine upto 242 KW(325 hp) at a maximum working pressure of 2,150 kpa (312 psi). The filter element is fully serviceable.....View More |  |
DIAGNOSTIC EQUIPMENT | Proper diagnosis of closed-loop feedback systems is paramount to ensuring that the engine performs its best while reducing exhaust emissions. Proper servicing can result in satisfied customers and higher repair profits........View More |  |
| You've spent a lot of time learning your trade, and you know the value of the right tool. Spend time correctly diagnosing and repairing, or spend time guessing. We know which one you'll choose......View More |  |
|
